H16 - FAQ

1. (*) What is the main difference between Gremsy H14 and Gremsy H16?

The H16 comes with more advanced design than H14 as below:

• Higher maximum carrying capacity up to 16 lbs
• Pan movement improvement in flying with heavy setup thanks to pan motor torque increase up to 2x
• Circular Quick Release - fast design connection, more safety when mounting gimbal under drone and taking care of your rigs with double safety solution.
• Fast connection with third party controller - Now, you can plug cable with open port in the roll vertical, do not need to open the board anymore.
• Ultra advantage when working with slip-ring which allows pan 360 degrees rotation without wire cable.

2. Is the Gremsy H16 quick release the same as Gremsy H3 and Gremsy H7?

Definitely.

3. Which quick release does Gremsy H16 use?

The Gremsy H16 uses Circular Quick Release - the same quick release as H3 and H7.

4. Is the Gremsy series waterproof?

No. The system battery, motors, and other electronic equipments are not waterproof.

5. How many operation modes does the H16 have and how do I switch between the modes?

Gremsy H16 supports 3 types of operation: Normal, Suitcase and Inverted Operation.

• The default operation is normal.
• Switching to Suitcase from Normal operation: Make sure the gimbal is in LOCK mode (you must switch to LOCK mode if it’s currently in FOLLOW mode), then hold the left / right side handle and transform to Suitcase operation. Now you can switch to Follow mode normally if you like. To come back to Normal operation, let's do the same thing, make sure the gimbal is in LOCK mode before transforming to the operation you want.
• Switching to Inverted from Suitcase operation: This is the same procedure with the case above. You should remember to put the gimbal in LOCK mode before transforming between Suitcase and Inverted operation.

Switching to Inverted from Normal operation and vice versa: You don’t need to power OFF the gimbal, you just need to turn OFF the motors, then transform the gimbal to the desired operation and turn ON the motors again.

6. What's included in the package of Gremsy H16?

The Gremsy H16 package includes:

• 1x H16 Gimbal
• 1x Handlebar & Stand
• 1x Circular Quick Release (which is mounted under handle)
• 1x Hard case
• 2x Mounting Monitor (which is mounted on handle)
• 2x gPower 4S - 3400mah Batteries
• 1x Charger
• 1x Wifi
• 1x USB Cable

7. Is it difficult to balance the gimbal and camera?

No, it is easy. It takes only 5 minutes to setup and balance.

8. How much weight of Gremsy H16 in handheld?

It weighs 2.6 kgs (5.73 lbs).

9. What kind of cameras does the H16 support?

List Camera Compatibility(*) with Gremsy H16:

Gremsy H16 is not designed to be compatible with a finite or specific list of cameras.

Compatibility is determined by a combination of weight, size and shape of the entire camera/ lens/ accessories setup.

Cinema Cameras (non-comprehensive list)

• 
  
  • RED Series: RED Epic, RED Scarlet, RED Weapon, RED Helium, RED Raven
  • ARRI Alexa Mini
  • Canon C100 (mk I - II), C300 (mk I - II), C500 (mk I - II)
  • Blackmagic URSA Mini, Blackmagic Cinema 4K
  • Sony F5, F55, FS5, FS7, FS100, FS700

DSLR + Mirrorless (non-comprehensive list):

• 
  
  • Canon 1Dc, 5D Mk I - IV
  • Nikon D810, D800, D500, D5
  • Sony A7S (mk I - II), A7r (mk I - II)
  • Panasonic GH3, GH4, GH5

10. How much weight can the H16 hold?

The maximum payload of the H16 is 7.25 kgs (16 lbs).

1 Votes